Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3EG7 EQ BK23189 - PA66-GF35 - BASF

Material Data Center offers the following functions for Ultramid® A3EG7 EQ BK23189:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Glass fiber reinforced injection molding grade for plastic parts in electronic components like housings for electronic control units or connectors. Ultramid EQ (Electronic Quality) materials offer a high purity regarding ionic and halogen containing compounds. This helps to minimize potential corrosion processes and to protect sensitive electronic components.
The product has a LS coloration (Laser Sensitive) and can be marked with Nd:YAG lasers.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 25 / * cm³/10min ISO 1133
温度 275 / * °C -
载荷 5 / * kg -
模塑收缩率, 平行 0.5 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.1 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 11150 / 7850 MPa ISO 527
断裂应力 195 / 130 MPa ISO 527
断裂伸长率 3.3 / 6.2 % ISO 527
无缺口简支梁冲击强度, +23°C 80 / 92 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 64 / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 8.7 / 12.7 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 7.7 / - kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 260 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 250 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 260 / * °C ISO 75-1/-2
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 >1E13 / - Ohm*m IEC 62631-3-1
表面电阻率 * / >1E15 Ohm IEC 62631-3-2
相对漏电起痕指数 - / 575 - IEC 60112
其它性能干 / 已调节单位Test Standard
吸水性 5.39 / * % 类似ISO 62
吸湿性 1.53 / * % 类似ISO 62
密度 1410 / - kg/m³ ISO 1183
模塑测量的特殊性能干 / 已调节单位Test Standard
ISO数据
粘数 148 / * cm³/g ISO 307, 1157, 1628
加工推荐(注塑)价值单位Test Standard
预干燥-温度 80 °C -
预干燥-时间 4 h -
加工湿度 ≤0.15 % -
注塑熔体温度 280 - 300 °C -
模具温度 80 - 90 °C -
函数
粘度-剪切速度 , Ultramid® A3EG7 EQ BK23189, PA66-GF35, BASF
剪切应力-剪切速度 , Ultramid® A3EG7 EQ BK23189, PA66-GF35, BASF
典型数据
加工方法
注塑
供货形式
粒料, 黑色
特征
可镭射打标
应用
电子电气
地区供应
其他信息
注塑成型
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 280 - 300 °C
injection molding, Melt temperature, recommended: 290 °C
injection molding, Mold temperature, range: 80 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.